Question : What are the differences between Get and post methods in form submitting. Give the case where we can use get and we can use post methods?

Answer : When to use GET or POST

The HTML 2.0 specification says, in section Form Submission (and the HTML 4.0 specification repeats this with minor stylistic changes):

–>If the processing of a form is idempotent (i.e. it has no lasting observable effect on the state of the
world), then the form method should be GET. Many database searches have no visible side-effects and make ideal applications of query forms.
–
–>If the service associated with the processing of a form has side effects (for example, modification of a database or subscription to a service), the method should be POST.

How the form data is transmitted?

quotation from the HTML 4.0 specification

–> If the method is “get” – -, the user agent takes the value of action, appends a ? to it, then appends the form data set, encoded using the application/x-www-form-urlencoded content type. The user agent then traverses the link to this URI. In this scenario, form data are restricted to ASCII codes.
–> If the method is “post” –, the user agent conducts an HTTP post transaction using the value of the action attribute and a message created according to the content type specified by the enctype
attribute.

Quote from CGI FAQ

Firstly, the the HTTP protocol specifies differing usages for the two methods. GET requests should always be idempotent on the server. This means that whereas one GET request might (rarely) change some state on the Server, two or more identical requests will have no further effect.

This is a theoretical point which is also good advice in practice. If a user hits “reload” on his/her browser, an identical request will be sent to the server, potentially resulting in two identical database or guestbook entries, counter increments, etc. Browsers may reload a GET URL automatically, particularly if cacheing is disabled (as is usually the case with CGI output), but will typically prompt the user before re-submitting a POST request. This means you’re far less likely to get inadvertently-repeated entries from POST.

GET is (in theory) the preferred method for idempotent operations, such as querying a database, though it matters little if you’re using a form. There is a further practical constraint that many systems have built-in limits to the length of a GET request they can handle: when the total size of a request (URL+params) approaches or exceeds 1Kb, you are well-advised to use POST in any
case.

I would prefer POST when I don’t want the status to be change when user resubmits. And GET
when it does not matter.

Question : Who is the father of PHP and explain the changes in PHP versions?

Answer : Rasmus Lerdorf is known as the father of PHP.PHP/FI 2.0 is an early and no longer supported version of PHP. PHP 3 is the successor to PHP/FI 2.0 and is a lot nicer. PHP 4 is the current generation of PHP, which uses the Zend engine under the hood. PHP 5 uses Zend engine 2 which, among other things, offers many additional OOPs features.

Question : How can we submit a form without a submit button?

Answer : The main idea behind this is to use Java script submit() function in order to submit the form without explicitly clicking any submit button. You can attach the document.formname.submit() method to onclick, onchange events of different inputs and perform the form submission. you
can even built a timer function where you can automatically submit the form after xx seconds once the loading is done (can be seen in online test sites).

Question : In how many ways we can retrieve the data in the result set of
MySQL using PHP?

Answer : You can do it by 4 Ways

1. mysql_fetch_row.
2. mysql_fetch_array
3. mysql_fetch_object
4. mysql_fetch_assoc

Question : What is the difference between mysql_fetch_object and
mysql_fetch_array?

Answer : mysql_fetch_object() is similar to mysql_fetch_array(), with one difference –
an object is returned, instead of an array. Indirectly, that means that you can only access the data by the field names, and not by their offsets (numbers are illegal property names).

Question : What is the difference between $message and $$message?

Answer : It is a classic example of PHP’s variable variables. take the following example.

$message = “Shashi”;

$$message = “is a owner of http://www.shashidharkumar.com/ “;

$message is a simple PHP variable that we are used to. But the $$message is not a very familiar face. It creates a variable name $mizan with the value “is a moderator of PHPXperts.” assigned. break it like this${$message} => $mizanSometimes it is convenient to be able to have variable variable names. That is, a variable name which can be set and used dynamically.

Question : How can we extract string ‘shashidharkumar.com’ from a string info@shashidharkumar.com using regular expression of PHP?

Answer : preg_match(”/^http://.+@(.+)$/”,’info@shashidharkumar.com’,$found);
echo $found[1];

Question : How can we create a database using PHP and MySQL?

Answer : We can create MySQL database with the use of mysql_create_db(“Database Name”).

Question : What are the differences between require and include, include_once and require_once?

Answer :

The include() statement includes and evaluates the specified file.The documentation below also applies to require(). The two constructs are identical in every way except how they handle
failure. include() produces a Warning while require() results in a Fatal Error. In other words, use
require() if you want a missing file to halt processing of the page. include() does not behave this way, the script will continue regardless. The include_once() statement includes and evaluates the
specified file during the execution of the script. This is a behavior similar to the include() statement, with the only difference being that if the code from a file has already been included, it will not be
included again. As the name suggests, it will be included just once.include_once() should be used in cases where the same file might be included and evaluated more than once during a particular execution of a script, and you want to be sure that it is included exactly once to avoid problems with function redefinitions, variable value reassignments, etc. require_once() should be used in cases where the same file might be included and evaluated more than once during a particular execution of a script, and you want to be sure that it is included exactly once to avoid problems with function
redefinitions, variable value reassignments, etc.

Question : Can we use include (”abc.PHP”) two times in a PHP page “makeit.PHP”?

Answer : Yes we can use include() more than one time in any page though it is not a very good practice.

Question : What are the different tables present in MySQL, which type of table is generated when we are creating a table in the following syntax:
create table employee (eno int(2),ename varchar(10)) ?

Answer : Total 5 types of tables we can create
1. MyISAM
2. Heap
3. Merge
4. INNO DB
5. ISAM
MyISAM is the default storage engine as of MySQL 3.23 and as a result if
we do not specify the table name explicitly it will be assigned to the
default engine.

Question : Functions in IMAP, POP3 AND LDAP?

Answer : You can find these specific information in PHP Manual.

Question : How can I execute a PHP script using command line?

Answer : As of version 4.3.0, PHP supports a new SAPI type (Server Application Programming Interface) named CLI which means Command Line Interface. Just run the PHP CLI (Command Line Interface) program and provide the PHP script file name as the command line argument. For example, “php myScript.php”, assuming “php” is the command to invoke the CLI program.
Be aware that if your PHP script was written for the Web CGI interface, it may not execute properly in command line environment.

Question : Suppose your Zend engine supports the mode <? ?>. Then how can you
configure your PHP Zend engine to support <?php ?>mode ?

Answer : In php.ini file:
set
short_open_tag=on
to make PHP support

Question : Shopping cart online validation i.e. how can we configure Paypal,
etc.?

Answer : We can find the detail documentation about different paypal integration process at the following site PayPal PHP
SDK : http://www.paypaldev.org/

Question : What is meant by nl2br()?

Answer : Inserts HTML line breaks
(
)
before all newlines in a string string nl2br (string); Returns string with ” inserted before all newlines.
For example: echo nl2br(”god blessn you”) will output “god bless
you” to your browser.

Question : Draw the architecture of Zend engine?

Answer : The Zend Engine is the internal compiler and runtime engine used by PHP4. Developed by Zeev Suraski and Andi Gutmans, the Zend Engine is an
abbreviation of their names. In the early days of PHP4, it worked as follows:

The PHP script was loaded by the Zend Engine and compiled into Zend opcode. Opcodes, short for operation codes, are low level binary instructions. Then the opcode was executed and the HTML generated sent to the client. The opcode was flushed from memory after execution.Today, there are a multitude of products and techniques to help you speed up this process. In the following diagram, we show the how modern PHP scripts work; all the shaded boxes are optional.

PHP Scripts are loaded into memory and compiled into Zend opcodes.

Question : What are the current versions of apache, PHP, and MySQL?

Answer : As of February, 2007 the current versions are PHP: php5.2.1
MySQL: MySQL 5.2
Apache: Apache 2.2.4
Note: visit
http://www.php.net/,
http://dev.mysql.com/downloads/mysql/,
http://www.apache.org/%20to%20get%20current
versions.

Question : What are the reasons for selecting lamp (Linux, apache, MySQL,
PHP) instead of combination of other software programs, servers and operating systems?

Answer : All of those are open source resource. Security of Linux is very very more than windows. Apache is a better server that IIS both in functionality and security. MySQL is world most popular open source database. PHP is more faster that asp or any other scripting language.

Question : How can we encrypt and decrypt a data present in a MySQL table using MySQL?

Answer : AES_ENCRYPT () and AES_DECRYPT ()

Question : How can we encrypt the username and password using PHP?

Answer : The functions in this section perform encryption and decryption, and
compression and uncompression:

Encryption	Decryption
AES_ENCRYT()	AES_DECRYPT()
ENCODE()	DECODE()
DES_ENCRYPT()	DES_DECRYPT()
ENCRYPT()	Not available
MD5()	Not available
OLD_PASSWORD()	Not available
PASSWORD()	Not available
SHA() or SHA1()	Not available
Not available	UNCOMPRESSED_LENGTH()

Question : What are the features and advantages of object-oriented programming?

Answer : One of the main advantages of OO programming is its ease of modification; objects can easily be modified and added to a system there by reducing maintenance costs. OO programming is also considered to be better at modeling the real world than is procedural programming. It allows for more complicated and flexible interactions. OO systems are also easier for non-technical personnel to understand and easier for them to participate in the maintenance and enhancement of a system because it appeals to natural human cognition patterns. For some systems, an OO approach can speed development time since many objects are standard across systems and can be reused. Components that manage dates, shipping, shopping carts, etc. can be purchased and easily modified for a specific system.

Question : What are the differences between procedure-oriented languages and
object-oriented languages?

Answer : Traditional programming has the following characteristics:Functions are written sequentially, so that a change in programming can affect any code that follows it. If a function is used multiple times in a system (i.e., a piece of code that manages the date), it is often simply cut and pasted into each program (i.e., a change log, order function, fulfillment system, etc). If a date change is needed (i.e., Y2K when the code needed to be changed to handle four numerical digits instead of two), all these pieces of code must be found, modified, and tested. Code (sequences of computer instructions) and data (information on which the instructions operates on) are kept separate. Multiple sets of code can access and modify one set of data. One set of code may rely on data in multiple places. Multiple sets of code and data are required to work together. Changes made to any of the code sets and data sets can cause problems through out the system.Object-Oriented programming takes a radically different approach:Code and data are merged into one indivisible item – an object (the term “component” has also been used to describe an object.) An object is an abstraction of a set of real-world things (for example, an object may be created around “date”) The object would contain all information and
functionality for that thing (A date object it may contain labels like January, February, Tuesday, Wednesday.
It may contain functionality that manages leap years, determines if it is a business day or a holiday, etc., See Fig. 1). Ideally, information about a particular thing should reside in only one place in a system.The information within an object is encapsulated (or hidden) from the rest of the system. A system is composed of multiple objects (i.e., date function, reports, order processing, etc., See Fig 2). When one object needs information from another object, a request is sent asking for specific information. (for example, a report object may need to know what today’s date is and will send a request to the date object) These requests are called messages and each object has an interface that manages messages. OO programming languages include features such as “class”, “instance”, “inheritance”, and “polymorphism” that increase the power and
flexibility of an object.

Question : What is the use of friend function?

Answer : Sometimes a function is best shared among a number of different classes. Such functions can be declared either as member functions of one class or as global functions. In either case they can be set to be friends of other classes, by using a friend specifier in the class that is admitting them. Such functions can use all attributes of the class which names them as a friend, as if they were themselves members of that class. A friend declaration is essentially a prototype for a member function, but instead of requiring an implementation with the name of that class attached by the double colon syntax, a global function or member function of another class provides the match.

Question : What are the differences between public, private, protected,static, transient, final and volatile?

Answer : Public: Public declared items can be accessed everywhere.
Protected: Protected limits access to inherited and parent classes (and to the class that defines the item).
Private: Private limits visibility only to the class that defines the item.
Static: A static variable exists only in a local function scope, but it does not lose its value when program execution leaves this scope.
Final: Final keyword prevents child classes from overriding a method by prefixing the definition with final. If the class itself is being defined final then it cannot be extended.
Transient: A transient variable is a variable that may not be serialized.
Volatile: a variable that might be concurrently modified by multiple threads should be declared volatile. Variables declared to be volatile will not be optimized by the compiler because their value can change at any time.

Question : What are the different types of errors in PHP?

Answer : Three are three types of errors:1. Notices: These are trivial, non-critical errors that PHP encounters while executing a script – for example, accessing a variable that has not yet been defined. By default, such errors are not displayed to the user at all – although, as you will see, you can change this default behavior.2. Warnings: These are more serious errors – for example, attempting to include() a file which does not exist. By default, these errors are displayed to the user, but they do not result in script termination.3. Fatal errors: These are critical errors – for example,
instantiating an object of a non-existent class, or calling a non-existent function. These errors cause the immediate termination of the script, and PHP’s default behavior is to display them to the user when they take place.

Question : What is the functionality of the function strstr and stristr?

Answer : strstr:
Returns part of haystack string from the first occurrence of needle to the end of haystack.If needle is not found, returns FALSE. If needle is not a string, it is converted to an integer and applied as the ordinal value of a character. This function is case-sensitive. For case-insensitive searches, use stristr().

Question : What are the differences between PHP 3 and PHP 4 and PHP 5?

Answer : Please read the release notes at
http://php.net/

Question : How can we convert asp pages to PHP pages?

Answer : There are lots of tools available for asp to PHP conversion. you can search Google for that. the best one is available at http://asp2php.naken.cc/

Question : What is the functionality of the function htmlentities?

Answer : Convert all applicable characters to HTML entities
This function is identical to htmlspecialchars() in all ways, except with htmlentities(), all characters which have HTML character entity equivalents are translated into these entities.

Question : How can we get second of the current time using date function?

Answer : $second = date(”s”);

Question : How can we convert the time zones using PHP?

Answer : By using date_default_timezone_get and
date_default_timezone_set function on PHP 5.1.0
// Discover what 8am in Tokyo relates to on the East Coast of the US

// Set the default timezone to Tokyo time:
date_default_timezone_set(‘Asia/Tokyo’);

// Now generate the timestamp for that particular timezone, on Jan 1st, 2000
$stamp = mktime(8, 0, 0, 1, 1, 2000);

// Now set the timezone back to US/Eastern
date_default_timezone_set(‘US/Eastern’);

// Output the date in a standard format (RFC1123), this will print:
// Fri, 31 Dec 1999 18:00:00 EST
echo ‘

‘, date(DATE_RFC1123, $stamp) ,’

‘; ?>

Question : What is meant by urlencode and urldecode?

Answer : URLencode returns a string in which all non-alphanumeric characters except -_. have been replaced with a percent (%) sign followed by two hex digits and spaces encoded as plus (+) signs. It is encoded the same way that the posted data from a WWW form
is encoded, that is the same way as in application/x-www-form-urlencoded media type. urldecode decodes any %## encoding in the given string.

Question : What is the difference between the functions unlink and unset?

Answer : unlink() deletes the given file from the file system.
unset() makes a variable undefined.

Question : How can we register the variables into a session?

Answer : $_SESSION[’name’] = “Shashi”;

Question : How can we get the properties (size, type, width, height) of an image using PHP image functions?

Answer : To know the Image type use exif_imagetype () function
To know the Image size use getimagesize () function
To know the image width use imagesx () function
To know the image height use imagesy() function

Question : How can we get the browser properties using PHP?

Answer : By using
$_SERVER[’HTTP_USER_AGENT’] variable.

Question : What is the maximum size of a file that can be uploaded using PHP
and how can we change this?

Answer : By default the maximum size is 2MB. and we can change the following setup at php.iniupload_max_filesize = 2M

Question : How can we increase the execution time of a PHP script?

Answer : by changing the following setup at php.inimax_execution_time = 30; Maximum execution time of each script, in seconds

Question : How can we take a backup of a MySQL table and how can we restore it. ?

Answer : To backup: BACKUP TABLE tbl_name[,tbl_name…] TO ‘/path/to/backup/directory’
RESTORE TABLE tbl_name[,tbl_name…] FROM ‘/path/to/backup/directory’mysqldump: Dumping Table Structure and DataUtility to dump a database or a collection of database for backup or for transferring the data to another SQL server (not necessarily a MySQL server). The dump will contain SQL statements to create the table and/or populate the table. -t, –no-create-info Don’t write table creation information (the CREATE TABLE statement). -d, –no-data Don’t write any row information for the table. This is very useful if you just want to get a dump of the structure for a table!

Question : How can we optimize or increase the speed of a MySQL select query?

Answer : • First of all instead of using select * from table1, use select column1, column2, column3.. from table1
•Look for the opportunity to introduce index in the table you arequerying.
•use limit keyword if you are looking for any specific number of rows from the result set.

Question : How many ways can we get the value of current session id?

Answer : How many ways can we get the value of current session id? session_id() returns the session id for the current session.

Question : How can we destroy the session, how can we unset the variable of a session?

Answer : session_unregister — Unregister a global variable from the current session

session_unset — Free all session variables

Question : How can we destroy the cookie?

Answer : Set the cookie in past.

Question : How many ways we can pass the variable through the navigation between the pages?

Answer : •GET/QueryString
•POST

Question : What is the difference between ereg_replace() and eregi_replace()?

Answer : eregi_replace() function is identical to ereg_replace() except that this ignores case distinction when matching alphabetic characters.eregi_replace() function is identical to ereg_replace() except that this ignores case distinction when matching alphabetic characters.

Question : What are the different functions in sorting an array?

Answer : Sort(), arsort(),
asort(), ksort(),
natsort(), natcasesort(),
rsort(), usort(),
array_multisort(), and
uksort().

Question : How can we know the count/number of elements of an array?

Answer : 2 ways
a) sizeof($urarray) This function is an alias of count()
b) count($urarray)

Question : What is the PHP predefined variable that tells the What types of
images that PHP supports?

Answer : Though i am not sure if this is wrong or not, With the exif extension you are able to work with image meta data.

Question : How can I know that a variable is a number or not using a JavaScript?

Answer : bool is_numeric ( mixed var) Returns TRUE if var is a number or a numeric string, FALSE otherwise.or use isNaN(mixed var)The isNaN() function is used to check if a value is not a number.

Question : List out some tools through which we can draw E-R diagrams formysql.

Answer :
Case Studio
Smart Draw

Question : How can I retrieve values from one database server and store themin other database server using PHP?

Answer : WeWe can always fetch from one database and rewrite to another. Here is a nice solution of it.
$db1 = mysql_connect(”host”,”user”,”pwd”);
mysql_select_db(”db1?, $db1);
$res1 = mysql_query(”query”,$db1);
$db2 = mysql_connect(”host”,”user”,”pwd”);
mysql_select_db(”db2?, $db2);
$res2 = mysql_query(”query”,$db2);
At this point you can only fetch records from you previous ResultSet, i.e $res1 – But you cannot execute new query in $db1, even if yousupply the link as because the link was overwritten by the new db.so at this point the following script will fail
$res3 = mysql_query(”query”,$db1); //this will failSo how to solve that? take a look below.
$db1 = mysql_connect(”host”,”user”,”pwd”);
mysql_select_db(”db1?, $db1);
$res1 = mysql_query(”query”,$db1);
$db2 = mysql_connect(”host”,”user”,”pwd”, true);
mysql_select_db(”db2?, $db2);
$res2 = mysql_query(”query”,$db2);
So mysql_connect has another optional boolean parameter whichindicates whether a link will be created or not. As we connect to the $db2 with this optional parameter set to ‘true’, so both link willremain live. Now the following query will execute successfully.
$res3 = mysql_query(”query”,$db1);

Question : List out the predefined classes in PHP?

Answer : Directory
stdClass
__PHP_Incomplete_Class
exception
php_user_filter

Question : How can I make a script that can be bi-language (supportsEnglish, German)?

Answer : You can maintain two separate language file for each of the language. All the labels are putted in both language files as variables and assign those variables in the PHP source. On run-time choose the required language option.

Question : What are the difference between abstract class and interface?

Answer : Abstract class: abstract classes are the class where one or moremethods are abstract but not necessarily all method has to be abstract.Abstract methods are the methods, which are declare in its class but notdefine. The definition of those methods must be in its extending class.Interface: Interfaces are one type of class where all the methods areabstract. That means all the methods only declared but not defined. Allthe methods must be define by its implemented class.

Question : How can we send mail using JavaScript?

Answer : JavaScript does not have any networking capabilities as it isdesigned to work on client site. As a result we can not send mails usingJavaScript. But we can call the client side mail protocol mailtovia JavaScript to prompt for an email to send. this requires the clientto approve it.

Question : How can we repair a MySQL table?

Answer : The syntex for repairing a MySQL table is REPAIR TABLENAME, [TABLENAME, ], [Quick],[Extended].This command will repair the table specified if the quick is given the MySQL will do a repair of only the index tree if the extended is givenit will create index row by row.

Question : What are the advantages of stored procedures, triggers, indexes?

Answer : A stored procedure is a set of SQL commands that can be compiled andstored in the server. Once this has been done, clients don’t need tokeep re-issuing the entire query but can refer to the stored procedure.This provides better overall performance because the query has to beparsed only once, and less information needs to be sent between theserver and the client. You can also raise the conceptual level by havinglibraries of functions in the server. However, stored procedures ofcourse do increase the load on the database server system, as more ofthe work is done on the server side and less on the client (application)side.Triggers will also be implemented. A trigger is effectively a type ofstored procedure, one that is invoked when a particular event occurs.For example, you can install a stored procedure that is triggered eachtime a record is deleted from a transaction table and that storedprocedure automatically deletes the corresponding customer from acustomer table when all his transactions are deleted.Indexes are used to find rows with specific column values quickly.Without an index, MySQL must begin with the first row and then readthrough the entire table to find the relevant rows. The larger thetable, the more this costs. If the table has an index for the columns inquestion, MySQL can quickly determine the position to seek to in themiddle of the data file without having to look at all the data. If atable has 1,000 rows, this is at least 100 times faster than readingsequentially. If you need to access most of the rows, it is faster toread sequentially, because this minimizes disk seeks.

Question : What is the maximum length of a table name, database name, andfieldname in MySQL?

Answer : The following table describes the maximum length for each type ofidentifier.

Identifier	Maximum Length(bytes)
Database	64
Table	64
Column	64
Index	64
Alias	255

There are some restrictions on the characters that may appear inidentifiers.

Question : How many values can the SET function of MySQL take?

Answer : MySQL set can take zero or more values but at the maximum it cantake 64 values.

Question : What are the other commands to know the structure of table usingMySQL commands except explain command?

Answer : describe Table-Name;

Question : How many tables will create when we create table, what are they?

Answer : The ‘.frm’ file stores the table definition.The data file has a ‘.MYD’ (MYData) extension.The index file has a ‘.MYI’ (MYIndex) extension.

Question : What is the purpose of the following files having extensions 1) .frm2) .myd 3) .myi? What do these files contain?

Answer : In MySql, the default table type is MyISAM.Each MyISAM table is stored on disk in three files. The files have namesthat begin with the table name and have an extension to indicate thefile type.The ‘.frm’ file stores the table definition.The data file has a ‘.MYD’ (MYData) extension.The index file has a ‘.MYI’ (MYIndex) extension.

Question : What is maximum size of a database in MySQL?

Answer : If the operating system or filesystem places a limit on the numberof files in a directory, MySQL is bound by that constraint.The efficiency of the operating system in handling large numbers offiles in a directory can place a practical limit on the number of tablesin a database. If the time required to open a file in the directoryincreases significantly as the number of files increases, databaseperformance can be adversely affected.The amount of available disk space limits the number of tables.MySQL 3.22 had a 4GB (4 gigabyte) limit on table size. With the MyISAMstorage engine in MySQL 3.23, the maximum table size was increased to65536 terabytes (2567 – 1 bytes). With this larger allowed table size,the maximum effective table size for MySQL databases is usuallydetermined by operating system constraints on file sizes, not by MySQLinternal limits.The InnoDB storage engine maintains InnoDB tables within a tablespacethat can be created from several files. This allows a table to exceedthe maximum individual file size. The tablespace can include raw diskpartitions, which allows extremely large tables. The maximum tablespacesize is 64TB.The following table lists some examples of operating system file-sizelimits. This is only a rough guide and is not intended to be definitive.For the most up-to-date information, be sure to check the documentationspecific to your operating system.Operating System File-size LimitLinux 2.2-Intel 32-bit 2GB (LFS: 4GB)
Linux 2.4+ (using ext3 filesystem) 4TB
Solaris 9/10 16TB
NetWare w/NSS filesystem 8TB
Win32 w/ FAT/FAT32 2GB/4GB
Win32 w/ NTFS 2TB (possibly larger)
MacOS X w/ HFS+ 2TB

Heading here

Lorem ipsum dolor sit amet.

The document tree diagram (with the element to be targeted) would be:

If you use a type selector like the example below, you will select all elements on the page: em {color: blue; } However, if you use a descendant selector, you can refine the elements that you select. The rule below will only select elements that are descendants of elements. If this rule is applied, the element within the will not be colored blue.p em {color: blue; } You can also jump levels in the document tree structure to select descendants. For example, the following code:Lorem ipsum dolor sit amet.

item 1
item 2
item 3

The document tree (with a third-level element highlighted) would be:

Using the following rule you can isolate any element inside a element, without having to describe the element. If this rule is applied, any element within element will be colored blue. However, the element within thewill not be colored blue:ul em {color: blue; } Descendant selectors are well supported across standards-compliant browsers.

Question : What is Child Descendant structure in CSS?

Answer : Child selectorsA child selector is used to select an element that is a direct child of another element (parent). Child selectors will not select all descendants, only direct children.For example, you may wish to target an that is a direct child of a , but not other elements that are descendants of the . A sample document could contain the following code:

Heading text

This is some text

This is a paragraph of text

The document tree (highlighting the that is a child of the) would be:

Using the following rule you can target any element that is a child of the other elements that are descendants but not direct children of the will not be targeted.div > em { color: blue; }ORdiv>em { color: blue; }Child selectors are not supported by Windows Internet Explorer 5, 5.5 and 6, but are supported by most other standards-compliant browsers.

Question : More to come………

Answer : More to come

Field	Type	Null	Key	Default	Extra
user_pri_id	int(15)		PRI	null	auto_increment
userid	varchar(10)	YES		null

PHP – Interview Question

How the form data is transmitted?

Quote from CGI FAQ

Heading here

Heading text

Submit a Comment Cancel reply

Recent Posts

PHP – Interview Question

How the form data is transmitted?

Quote from CGI FAQ

Heading here

Heading text

Related posts:

Submit a Comment Cancel reply

Recent Posts